Differences

This shows you the differences between two versions of the page.

--- print:ubuntu [2011/07/27 14:26] – maa
+++ print:ubuntu [2016/04/19 16:54] (current) – dreger
@@ Line 1: / Line 1: @@
+prin
 ====== Install a network printer on Ubuntu ======
 Requirements:
-  * your ZEDAT login and password (if not on a computer in the IMP domain)
+  * your ZEDAT login and password
-  * the ip address of the printer you want to connect to
+  * the name of the printer you want to connect to
   * the following instructions will only work from a computer in either the physics department network or from WLAN (eduroam)
@@ Line 15: / Line 16: @@
 {{:print:img:print-ubuntu2.png}}
-) At the next window choose **Network Printer** and wait until the list of printers appears.
+) At the next window choose **Network Printer**. Then click on **Windows Printer via SAMBA**. If this option is missing, you need to run ''sudo apt-get install smbclient'' in a terminal window first. Type in the upper right corner **wprint.imp.fu-berlin.de/printer**. Replace **printer** by the name of your printer. You can set your username and password now, otherwise you will be asked every time you print. Therefore click on **Set authentication details now** and enter your ZEDAT account and password. Make sure you type FU-BERLIN\ in front of your ZEDAT account name. After that click **Forward**.
-{{:print:img:print-ubuntu3.png}}
+{{:print:img:print-ubuntu3-3.png}}
-) Locate your printer by its ip address and click it. Then click **Forward**.
+) If you know your printer model choose your manufacturer, then click **Forward**, choose your model in the next window and click **Forward** again. If you don't know your printer model choose **Generic**.
-{{:print:img:print-ubuntu4.png}}
+{{:print:img:print-ubuntu4-3.png}}
-) Wait until the driver is found. Usually you shouldn't change anything on this window, just click **Forward**.
+) You can change some details about additional hardware here. Usually you can just click **Forward**.
-{{:print:img:print-ubuntu5.png}}
+{{:print:img:print-ubuntu5-1.png}}
 ) You can give this printer a name and optionally add its location.
-{{:print:img:print-ubuntu6.png}}
+{{:print:img:print-ubuntu6-1.png}}
 ) Now you should the following window.Click on **Print Test Page**.If a test page is printed the printer should be installed correctly.